Download Sysmac Studio v1.45.1 x64 (5GB+)

السَّلاَمُ عَلَيْكُمْ وَرَحْمَةُ اللهِ وَبَرَكَاتُهُ
Menurut situs omron, "Sysmac Studio Integrated Development Environment allows you to boost your productivity as is the 1st Industry IDE integrating Logic, Motion, Robotics, HMI, Vision, Sensing, Safety and 3D Simulation in one single platform." (https://industrial.omron.eu/en/products/sysmac-studio)

Sysmac Studio dapat memrogram antara lain :

• NJ/NX Series controllers
• NA Series HMI
• NX Series I/O and safety
• G5 Series servo
• MX2 Series and RX-series frequency inverter
• FH and FQM vision system and sensor
• GX network components
• E3 N-Smart sensors
• ZW-series measurement sensors
• One software for motion, logic sequencing, safety, drives, vision and HMI
• Fully compliant with open standard IEC 61131-3
• Supports Ladder, Structured text and In-Line ST programming with a rich instruction set
• CAM editor for easy programming of complex motion profiles
• One simulation tool for sequence and motion in a 3D environment
• Advanced security function with 32 digit security password
  

Berikut release note untuk versi 1.45 yang dikutip disini https://automation.omron.com/en/us/support/resources/software-revision-change-history/sysmac-studio-version-1-auto-update-version-1-45 atau lengkapnya disini https://www.ia.omron.com/product/tool/454/sysmac-studio/e1_doc.html

Support of New Type

Support the following Controllers:

• NJ501-R[]00 Controller version 1.44
• NJ501-R[]20 Controller version 1.44
• NY512-1[]00 Controller version 1.24
• NY512-Z[]00 Controller version 1.24
• NY532-1[]00 Controller version 1.24
• NY532-Z[]00 Controller version 1.24
• NJ501-5300 Controller version 1.21 (CNC 1.02)
• NY532-5400 Controller version 1.21 (CNC 1.02)

Robot Integrated CPU Units Ver 1.43 and later support the following robots:

• Viper series articulated robots
• i4 series SCARA robots
• iX3/iX4 series parallel robots.

Improved functions

• Copy multiple POUs (programs, functions, FBs) together
• Single-click on a ladder rung makes a rung element selection
• Network-published variables are not eligible for Delete Unused Variables function
• Show the EtherCAT slave/NX unit at a failed transfer
• Transfer to NX unit is possible during an EtherCAT communication error
• Tag set name in EtherNet/IP connection setting permits a hyphen
• EDS file creation function for CIP Safety devices
• CIP  connection type (Type2a, 2b) can be changed for several devices at once with batch setting feature
• Bulk editing for variable comments
• Search and jump to the resources
• Variable display
• Search Unused Variables function
• Improved error messages shown for a build
• Embed a variable value in a user alarm message
• Only frequently-used property items are shown in the Standard mode.
• Embed Dialog for advanced settings is available in Properties Tab
• Animation window was merged into the Properties window.
• 3D Visualizer displays real operational time

Enhanced/Improved functions

CONTROLLER

• Solved the problem that executing Transfer in Online Edit during a simulation of NJ501-R might stop a robot control task.
• Solved the problem that a major fault might occur after a build error associated with variables was resolved by changing the task setting.

ROBOT INTEGRATED CPU/3D SIMULATION

• Support the Remote Encoder Setting Function
• Improved the problem that an error might occur and disturb an access to RobotControlSetting when a simulation of a project that includes a robot was performed.
• Improved the problem that executing a simulation from the 3D Visualization pop-up menu of an Application Manager device might fail.
• Improved the problem that during a simulation, performing online program editing that includes IEC variables referenced by EXTERNAL keywords in a V+ program caused a V+ program execution error.
• Improved the problem that when an NJ501-Rx20 (DB model) controller was set and a simulation of the project where an NJ Robotics instruction was used in a program was run, an error occurred and an access to RobotControlSetting was disturbed.
• Improved the problem that an online connection or simulation while the V+ variable list is shown initialized initial values of a precision point array.
• Improved the problem that when a shape script with a code to assign values into a REAL variable was run with Windows setting using a decimal comma instead of a decimal point, an error message was shown and the shape script was aborted.

SAFETY

• Support the function to update configurations and setting data for Safety Units
• Improved the usability so that a terminated connection can be reestablished with the Safety CPU Unit due to a timeout during an upload.

HMI

• Improved overall performances.
• Soft-NA supports Runtime 1.12 to 1.15.
• Solved the problem that in a project using multiple HMIs, data type definition might  become invalid when a device was switched from controller to HMI.
• Solved the problem that a mapped variable might not be shown on the Variable Mapping when a device was switched from controller to HMI.
• Solved the problem that an invalid resources ID might be assigned to an edited resource on the page editor.
• Solved the problem that a copied page group might be pasted in the same page size of the original unit model.
• Runtime Solved the problem that  an Input control action caused an error if  performed at a start of NA.
• Runtime Solved the problem that E_PAG_011 might occur at a pop-up window appeared.
• Runtime Solved the problem that a CSV file created in data logging might be overlapped with a previously saved file.
• Runtime Solved the problem that an error occurred when a variable value set to a conditional expression of an event became unallowable one for its data type.
• Runtime Solved the problem that an error was rarely indicated in an operation when some objects sharing a variable were used in multiple pages.
• OS Support the function to insert a variable value into a message at a user alarm.

Download sysmac studio v1.45.1 disini

Onedrive Link

https://1drv.ms/u/s!AuAsPxnjZH9-t0C6EXY8AF8CcZMf?e=31wP3R

Google Drive Link

https://drive.google.com/drive/folders/1GXLOwfBTe6sQTDzLsbvMm_GT_oYww_mb?usp=sharing

atau buka www.ismaillowkey.net/software , folder Omron -> Sysmac Studio -> v1.45.1

"klik next jika meminta serial,abaikan serial number"

Setelah instalasi, jangan buka sysmac studio,  extract medicine.7z dan double click Register.reg kemudian klik yes dan buka sysmac studio 

Good Luck

Semoga bermanfaat. Bantu kami dengan mengklik salah satu iklan di blog ini

وَعَلَيْكُمْ السَّلاَمُ وَرَحْمَةُ اللهِ وَبَرَكَاتُهُ

Artikel terkait :